|
ISO 216 specifies international standard (ISO) paper sizes used in most countries in the world today. The standard defines the "A" and "B" series of paper sizes, including A4, the most commonly available size. Two supplementary standards, ISO 217 and ISO 269, define related paper sizes; the ISO 269 "C" series is commonly listed alongside the A and B sizes. All ISO 216, ISO 217 and ISO 269 paper sizes (except DL) have the same aspect ratio, 1:, at least to within the rounding to whole numbers of millimetres. This ratio has the unique property that when cut or folded in half widthwise, the halves also have the same aspect ratio. Each ISO paper size is one half of the area of the next larger size. == History == The advantages of basing a paper size upon an aspect ratio of were already noted in 1786 by the German scientist Georg Christoph Lichtenberg, in a letter to Johann Beckmann. The formats that became A2, A3, B3, B4 and B5 were developed in France, and published in 1798 during the French Revolution. Early in the twentieth century, Dr Walter Porstmann turned Lichtenberg's idea into a proper system of different paper sizes. Porstmann's system was introduced as a DIN standard (DIN 476) in Germany in 1922, replacing a vast variety of other paper formats. Even today the paper sizes are called "DIN A''x''" in everyday use in Germany, Austria, Spain and Portugal. The main advantage of this system is its scaling: if a sheet with an aspect ratio of is divided into two equal halves parallel to its shortest sides, then the halves will again have an aspect ratio of . Folded brochures of any size can be made by using sheets of the next larger size, e.g. A4 sheets are folded to make A5 brochures. The system allows scaling without compromising the aspect ratio from one size to another – as provided by office photocopiers, e.g. enlarging A4 to A3 or reducing A3 to A4. Similarly, two sheets of A4 can be scaled down to fit exactly one A4 sheet without any cutoff or margins. The weight of each sheet is also easy to calculate given the basis weight in grams per square metre (g/m2 or "gsm"). Since an A0 sheet has an area of 1 m2, its weight in grams is the same as its basis weight in g/m2. A standard A4 sheet made from 80 g/m2 paper weighs 5 g, as it is (four halvings) of an A0 page. Thus the weight, and the associated postage rate, can be easily calculated by counting the number of sheets used. ISO 216 and its related standards were first published between 1975 and 1995: * ISO 216:2007, defining the A and B series of paper sizes * ISO 269:1985, defining the C series for envelopes * ISO 217:2013, defining the RA and SRA series of raw ("untrimmed") paper sizes 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「ISO 216」の詳細全文を読む スポンサード リンク
|